SPECIFICATIONS

* Size:Diameter 128mm * Height 53mm /5 x 2.1 inches

* Weight:800g

* Activation time:≈3s

* Extinguishing Range:≈1m³

* Life span:3 years

* A...

Buy Now From Amazon

Product Review

SPECIFICATIONS

* Size:Diameter 128mm * Height 53mm /5 x 2.1 inches

* Weight:800g

* Activation time:≈3s

* Extinguishing Range:≈1m³

* Life span:3 years

* Active ingredients:Environmental harmless Dry Powder(NH4H2PO4)

Do not deliberately throw, ignited fire to the fire extinguisher.

Do not expose the fire extinguisher to water sources to prevent damage to the fire extinguishing mechanism.

Forbidden to damage or dismantle. Comes with a user manual

Car-Auto Fire Extinguisher Installation Notes

1, Find a suitable location in the car hood, and clean up the location to facilitate the paste. 2, Strip the outer layer of the 3M VHB sticker and apply the glue evenly over the surface. 3, Paste the product in the designated position and fix it for 15-20 minutes.

3M VHB Sticker + Glue

When bonding, it is necessary to operate as follows to obtain an enhanced bonding effect:

1, The adhesive surface must be cleaned and dried first. It is recommended that the oily surface be wiped with a mixture of detergent and water to clean the surface.

2, After the solvent to be cleaned is dried, 3M VHB Sticker is applied to the adhesive surface, and pressure is applied to make it adhere effectively.

3, Remove the 3M VHB Sticker release paper, apply it to 3M VHB Sticker surface with glue, and finally paste it to the target location. During the lamination process, the end should be attached first and then slowly pressed to the other side to reduce the chance of bubble generation.

4, The ideal temperature for pasting is 15-38℃, not lower than 10℃.

  • Targeted: It can be used for the car engine, electric boxes and other small and easy to catch fire areas.
  • Rapid response: in the event of sudden fire, the fire extinguisher can automatically trigger the fire mechanism, in 2-3 seconds to control the fire, resulting in minimum loss, maximum protection of life, and property safety.
  • Easy to use and operate: You only need to install the automatic fire extinguisher in advance to fire prone position,and in the event of fire it can effectively control the fire; (2) comes in a small size, suitable for placing in a variety of small spaces for maximum coverage
  • Safe and effective: through repeated experiments, this product can effectively put out A / B / C / E / F fire class.
  • Warranty period: the product is valid for three years, during which no maintenance is required.

Similar Products

 AFO Fire Ball, ABC Fire Extinguisher, Fire Suppression Device, Fire Safety Product With SignAFO Fire Extinguisher Ball, self-Activation, AUTO FIRE Off DeviceElide Fire Ball, Self Activation Fire Extinguisher, 2018 New Version , Boat Extinguisher, Car Extinguisher, Fire Safety Product, Elide, 5 Year warrantystacy riccelli Fire Extinguisher Ball Self-Activation -Fire Suppression Device (1)Creality Capricorn XS Series Low Friction PTFE Bowden Tubing 2 Meters for 1.75mm Filament with PTFE Teflon Tube Cutter for Creality Ender 3 Ender 3 Pro Cr-10 3D PrinterFireSlayer Automatic Fire Suppression Automotive RV Tube ExtinguisherCapricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)FYSETC 3D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling - 10 PackGenuine E3D V6 Socks Pro (Pack of 3) (V6-SOCK-PRO-3PACK)