Product Review

Name of a Commodity：CINOTON Infrared sensor

Specification:
power Source:DC120V
Power Frequency:50/60H
Rated load:MAX.500W resistive load MAX.200W Inductive load
Detection Range:150°
Detection Distance: MAX18m (adjustable)
Time Setting:5sec,1min.5min.10min
Detection Motion Speed:0.6-1.5m/s
Working Temperature Power:-10℃--+40℃
Installation Height:1-4m

Adjust the description:
1.Lite-up（ON TIME）：while three- way-switch put on "ON TIME" position，the light keep lite-up.
2. IR Sensor（AUTO）：while three-way-switch put on AUTO，sens button rotate in clockwise direction to MAX，lux button rotate in clockwise direction to Max, it will work both day and night. If it detective any action, it will lite up the light. And after the action leaving, it will be delay 5s-5min, and then lite off. Lux button rotate in anticlockwise direction to min, during day time, if it detective action, it will trigger the light to flack twice, but not lite up. If it detective action in the night, it will trigger the light lite up. And delay 5s-5min after action leaving and lite off.
3.weak lighting（DIM）: LUX button rotate in anticlockwise direction to min. keep 5-50Lux (20%)at night, and while detective action it will lite up(100%) , and after the action leaving, delay 5s-5min from100% lite up to 20% lite up. When the environment lx is over 30-400Lx ,it will trigger the light lite off. The the delay of weak lighting based the set data(lx and time), and the light will lite off as though it detective any action.
4.D2D mode：lux to be min，while environment lx is 5-50lux, the light will lite up(100%)(lighting detective is not affected by any action.) while the environment lx is35-400lux, lite off. From lite up (100%) to lite off, the delay time is based TIME Set. Lux to be Max, keep lite up, and D2D mode is useless. So under D2D mode, make sure the Lux to be Min Position.

IMPORTANT：Read all safety prec