Product Review
Instruction:
1. Place 4pcs AAA batteries in the battery compartment, then assemble cover;
2. Unlock the top cover by turning it anti-clockwise. Fill the sanitizer you want to, then close the cover. Pls make sure
the sanitizer/soap does NOT contain solid particles to avoid clogging.
3. To switch on, press and hold the button for 3seconds, when the indicator turns red and flicker, it means workable.
By short-pressing button, you can adjust soap volume with low, medium, high 3 volumes liquid.
4. Put your hand under the sensor or close the sensor (light indicator), the soap will flow out.
Safety precautions:
Please do not wash the unit. To clean, simply wipe with a damp cloth and wipe it immediately with a clean, dry cloth and try again.
Wipe the body with cloth regularly to avoid long-term corrosion upon the unit, and this can help extend the items lifetime.
Do not use in direct sunlight. The sensor may trigger or not work properly.
Never install new and old batteries in the product at the same time.
Never fill with too thick, solid, semisolid liquid, this may block the nozzle and damage the product.
Always keep the main body straight and upright and ensure the separate waterproof stand, which is provided with the product, is fixed to the bottom.
Never immerse the unit, including the bottom, into water. This may cause the product to malfunction due to the inner electrical parts of the unit.
Specifications:
Material: Stainless steel PC and ABS plastic.
Capacity of dispenser: 280ml
Power Supply: 4 x AAA Battery(included).
Package Contents:
1 x Soap Dispenser
4 x AAA Batteries
1 x User Manual
- Premium Quality and Modern Design - With Stainless steel and premium PC + ABS plastic material, it is suitable for any bathroom or kitchen sink countertop. It will not rust or clog, it can hold almost ten ounces of soap and has the dimensions of approximately eight inches tall and four inches in diameter. And the Sleek & Elegant brushed nickel stainless steel with a classic and contemporary design allows it to blend with modern living environments.
- Touchless & Sensitivity - Our soap dispenser sets comes with Built-in Accurate Infrared Motion & PIR sensor detection technology that detects your hand within one pass - Put your hand under the sensor to let the dispenser start to work. Don't need to wave your hand multiple times. Washing hands without else dirty.
- 3 Adjustable Levels - Three different levels: To adjust the soap liquid volume, press the switch button once, twice or three times, there are total 3 levels of soap liquid volume. You can change how much of the soap comes out. No dripping or trailing, doesn't waste soap. Compatible with any kind of liquid hand or dish soap, and also works great with hand or body lotion.
- Easy to Use and Long Working Time - After inserting the batteries (included) by pressing and holding the switch button for three seconds, the indicator with light and the dispenser is activated; use the same instructions to switch it off; soap flow and thickness can be adjusted; Use of Japanese intelligent motion infra-red sensor, compared with other infrared sensors, can improve the ability to resist aging and working hours
- Anti-leakage and Waterproof - Compare with other soap dispenser, our soap dispenser increase the capacity of waterproof, moisture-proof and Leak-proof. Using AAA-level anti-leakage and waterproof technology to prevent the soap or water to corrode circuit board. Waterproof base helps to prevent the battery compartment from getting soaked in water which causes corrosion and the dispenser fail to operate. It will only be activated when needed unlike others that are too sensitive can have spillages.
