Product Review
Tips:
* Where is the best place to stick the mics ?
Depends on what instrument you are trying to mic. Most instruments the best placement will be directly underneath the saddle/bridge.
* What is the little square plastic piece for ?
You can thread the wire tie thru it in place, then stick the square out of the way and secure the excess cable to it.
* How to use the Self-adhesive ?
Remove the plastic film from the back of the transducer to expose the adhesive.
Features:
1. Through Cable Hole:7 x 3mm/0.28" x 0.12"(L*W)
2. Endpin Jack Length:6.2cm/2.44"
3. Fixed Device: 28 x 28 x 8mm/1.1" x 1.1" x 0.31"(L*W*T)
4. Cable Length(Approx.): 76cm/30"
5. Plug Dia: 12mm/0.47"
6. Material: Plastic,Metal,Electronic Part
7. Total Size: Length: 86cm/33.9"
Package Contents:
1 x Pickup
1 x cable fixed mount square
- Plug Dia:6.35mm/0.25 inch;Cable Length(Approx.) : 35cm/ 13.78 inch,Drill a hole from inside the body,loosen the end-pin jack nut,insert it to the hole and tighten the nut
- Very easy to install and sounded good through several different amps,No Soldering Required,No Battery Required. pre-wired piezo mic save time for you,easy to install, convenient to use
- This is a pre-wired,pre-soldered piezo and jack harness which make it easy for you. You can attach the piezo in or on your build, drill a hole and mount the jack, very easy to install and sounded good through several different amps
- Pickup piezo transducer with metal material body will enhance the sound of your guitar or ukulele with the advantage of being able to eliminate interfering external sounds and not be influenced by sound reflections from nearby objects, give it a purer acoustic tone
- With the advantage of being able to eliminate interfering external sounds and not be influenced by sound reflections from nearby objects,Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response,Suitable for Guitar Violin Ukulele Mandolin Banjo Cigar box Guitar
