Product Review

Only for iPhone 6G 4.7 inch, Not for 6S 4.7 inch and 6S Plus 5.5 inch and 6 Plus 5.5

The screen replacement were pre-assembled. Including Ear Speaker, Front Camera, Proximity Sensor, LCD metal back plate, without home button. Convenient for replacing and installing, save time and low risk, only install the screw and restart the phone, everything will be working normally.

Note:
1. The New Screen is without home button, please swap home button out from your old screen and install it.
2. Do not apply pressure to the corners of the LCD panel.
3. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
4. DO NOT over-bend or use excessive force to tear it.

Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps:
1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition.
2. Restart your phone: press home button and power button simultaneously till the phone shut down, after few mins, turn the phone on. Or reconnect your battery.

If the Ear Speaker, Front Camera or Proximity Sensor is not working after install new screen, please change them from your old screen to new screen. And please contact seller, we will provide a part refund for wasting your time.

If the Home Button or the finger print ID is not working as well, please change the lcd metal back plate with long flex cable from your old screen to the new screen. Also please contact seller, we will provide a part refund for wasting your time.

Any questions, please don't hesitate to contact us till solve the problem.

Your good comments and satisfaction is our greatest motivation. Thanks for your buying, your choice will be the most correct, don't worry.