Product Review

This VTX is that you can mount it on top of your FC/PDB stack thanks to the 30x30mm mounting pattern like OMNIBUSF4 and OMNIBUSF4 Pro.
MMCX has more mating cycles and is more robust.

Feartures:
With MIC
5V output for camera
2S-6S input power supported
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable
Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop Whoop-Tower/OmnibusF4 Pro)
Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera


Specifications:
Operating Voltage: 7 - 24V
Power supply: 5V camera@under 0.5A max
Output power: 25mw/200mw/500mw/800mw Range: Up to 6-8km with omnidirectional RHCP antennas
Antenna connector: MMCX
Video Format: NTSC/PAL
Port connector: JST,6pin
Dimensions: 36(W)x36(D)mm, 30.5x30.5mm(hole)
Weight:9.6g(excluding antenna)

Note :

Before powering the VTX up, it's very important to first installed antenna otherwise the product will have static

The vtx can power up 5V camera @ under 300mA
Note :

5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action.

37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.

This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.