Product Review

Description：

Paintless Dent Repair Slide hammer has the advantages of simple operation and easy to control.It is environmental protection and it does not

damage the original paint. You can use the slide hammer with different sizes of pull tab to repair dent .

Specifications:

Number of Pieces: 1pcs slide hammer

Color:silver

Package Weight: 1400g

Type:Paintless Dent Repair tools

Function: paintless dent removal

HOW to use：

1.Clean the surface of the dented area with the release solution (isopropyl alcohol) to remove any dirt or wax.

2.Apply hot glue to tab.  Make sure glue is not scalding hot to prevent damage to paint.  If glue is too hot, allow it to cool for

about 10 seconds on the tab before you apply the tab to the vehicle panel.

3.Allow the glue to set for about 5 minutes prior to using any glue pulling tool.The glue should be hard to the touch at the time

you begin repair.

4. Place the paintless dent repair glue pulling tool of choice directly over the dent pulling tab shaft until the female adapter in

the center of the dent lifter slides over the shaft of the tab.

5.Slowly press the concave lift handle several times until it achieves the desired effect. As the damage becomes smaller, the

size of the indent tab is reduced until the dimples become flat. Use the slide hammer, please use it repeatedly, and

continue to reduce the size of the adhesive tab as the size of the dimple decreases.

6. Spray 91% of alcohol on the edge of the glue and peel it off with a plastic spatula. You may need to repeat the steps until you

reach the desired result.

Tip:

You need to use tabs with glue gun and glue sticks together, but this listing not include glue gun,tabs and glue sticks.

Product listing only a slide hammer. If you have some question about it,Please contact with Us.Thanks!<