Product Review

Important TIPS for Operation

1. Do not plug in power cord until you add water inside the boiler.
2. Open the safety cap at the top counterclockwise and fill in less than 250ml water.
3. Do not add too much water, otherwise high pressure will push excessive water to run out from the cap.
4. Tighten the safety cap at the top before using, then plug in the power cord.
5. When the heat-up process finishes, indicator light turns off and you are good to go.
6. Hold the handle, then press down the big button while push up to the ON side so that you can get steam.
7. Unplug the power when you finish cleaning.
8. The safety cap can not be opened when there is still pressure inside the boiler, please wait until the device to cool down.
9. If you have any concern about using the device, please contact seller directly for further support!

⇉ Specifications ⇇
❖ Net Weight: 2.20 lb (1.0 kg) ⇛ Maximum Capacity: 450ml/15.4oz
❖ Warm Up Time: 3 minutes ⇛ Dimension: 9.84 x 5.03 x 7.48 in
❖ Steam Pressure: 0.25-0.32 Mpa ⇛ Injected Steam Capacity: 28 g/min
❖ Rated Power: 900-1050 W ⇛ Functioning Temperature: 332 °F (169 °C)
❖ Power Cord Length: 2.8 m/9 ft ⇛ Temperature controller: 270 °F (132 °C)
❖ Total Tank Capacity: 450 ml ⇛ Rating of Power Supply: AC 100 V, 50/60 Hz

➤ What's Included
â—¬ 1 x Funnel â—¬ 1 x Spray Cup with Round Brush
â—¬ 1 x Bent Spray Nozzle â—¬ 1 x Long Spray Nozzle
â—¬ 1 x Measuring Cup â—¬ 1 x Door/Window Cleaning Tool
â—¬ 1 x Fabric Steamer Tool â—¬ 1 x Extended Connecting Spray
â—¬ 1 x Towel Sleeve for Fabric Steamer Tool