Product Review
The Hovinso Ultrasonic Pest Repeller utilizes an advanced automatic variable frequency ultrasonic wave and electromagnetic wave to effectively intervene and stimulate the rat's auditory system to make it intolerable.
ã€CAUTIONS】
1)Never use pest repellent outdoors and never put it in high-temperature and moist places.
2)The ultrasonic pest repellent should be working continuously without stopping.
3)The electronic pest repellent should be installed as low as possible from the ground because most of the mice running on the ground Moreover there should be no obstacles in front of electronic pest repellent.
ã€OUR FEATURE】
1)The newly added mechanical wave can generate vibration wave and audio wave at the same time, which enhances the effect of this product to drive out mice.
2)This product uses three horn outputs, so the ultrasonic waves can be transmitted 360 degrees in all directions.
ã€Operation Methods】
1)Plug the one end of the attached power line into the power socket at the bottom of ZB018 , and plug another of the attached power line into the AC110V power socket
2)Then the red LED will be flashing in the top center part of ZB018 which shows the super-low electro-magnetic wave working.
The frequency of red LED flashing is synchronous with the super-low electro-magnetic wave.
3)When the blue LED lighting , that shows the No . 1 and No . 2 ultrasonic waves working and they will stop working when the blue LED putting out
4)When the green LED lighting , that shows the No . 3 and No 4 ultrasonic waves working.
5) Push down the round button switch in e o center at of ZB018 the orange LED will be lighting and the mechanical wave ( vibration wave and sonic wave ) will give out Press this round button switch again , then the orange LED will be putting out which shows the mechanic wave will be stop.









