Product Review

INSTRUCTION
1. Create your own design / pattern on the computer
2. Adjust proper blade depth and cutting pressure.
3. Cut with the gloss side facing DOWN and the duller back of the vinyl facing up.
4. Weed away the excess vinyl, leaving your design on the carrier sheet.
5. Apply the design to your T-shirt with heat press at 300-320℉ for 10-15 seconds (if you use a home iron, press it with firm pressure).
6. Wait for the vinyl to cool and gently peel off backing after few minutes.

* Recommendation: DO A TEST CUT BEFORE YOU BEGIN YOUR PROJECT

Laundering
* Do not dry clean
*Do not bleach
* Hand wash inside out after 24 hours