Product Review

How to use this tool?
1.Need 1x Pcs 9V battery to work
2.Set the car in TPMS learning mode. (car horns twice)
3.Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing
upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release
the button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is
read and the turn signal to be read at the next position will light
4.Follow this order to rest TPMS one by one: Front left, front right, rear right, rear left
5.After all sensors reseted, the car horns twice, the TPMS re-learn finished

How to set my car in TPMS re-learn mode?

GM series cars
1.Make the gear in P position
2.Use cruise to choose TPMS re-learn mode in the dashboard settings
3.Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully
entered. If equipped, the message center will display the front left (LF) tire

Ford series cars
1.Make the gear in P position
2.With the ignition switch to OFF, press and release the brake pedal
3.Turn the ignition switch from the OFF position to the RUN position 3 times and end at RUN position
4.Depress and release the brake pedal
5.Ignition to OFF position
6.Ignition goes from the OFF position to the RUN position 3 times and ends at RUN position
7.Horn will ring once and the TPMS indicator flashes, then the learning mode has been successfully
entered. If equipped, the message center will display the front left (LF) tire

Notice:
All support models are in the PDF file, please check the "Comparison Chart" in Technical Specification clearly before you place an order.
In case you still have questions or concerns, please don't hesitate to contact us back so we can assist further.