Product Review

Specifications:

Item Name: 23-piece front wheel bearing tool kit
Application: fits front wheel drive cars and small trucks
Material: carbon steel for tools, ABS plastic for case
Dimensions: 17.7 x 12.2 x 4.1 in.
Item Weight: 24 lb.
Operation:
Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2 Assemble the tool components, and press out the worn bearing.
Step.3 Lightly lubricate the new bearing, and position it for installation with the tool components assembled.
Press the bearing into the spindle assembly until it bottoms.
Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention : The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing. Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires