Product Review
Specification:
Dynamic mode: 22 modes
Static Color: 20 colors
PWM Grade: 256 levels
Brightness Grade: 5 levels
Speed Grade: 10 levels
Demo mode: Yes
Direct Color Select: Yes
Output Color Switchable: Yes,6 options
Working Voltage: DC 5 ~ 24V
Output Current: 3x4 peak,3x2A constant
Remote frequency: 433.92MHZ
Remote distance: >15m at open area
Low voltage operation, can be compatibly use on any device of USB interface. Not for safety concerns.Please be sure of your power adapter amps is suitable for your led strips
Package Included:
1 × 17Key USB Remote Controller For led strips.
- ▶ Working voltage: DC 5V, the light strip and power supply must both be 5V (Input voltage 5V = Output voltage 5V). Simple connection, easy control, remote control distance is 10 meters.
- ▶16 colors, adjustable brightness, On/Off, 5 Light Patters: Flash, Strobe, Fade, RGB Smooth-change, Static.16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change. IR Remote.
- ▶The volts of the power supply must correspond to the volts of the strip light！！！If Very dim, only displays red color. Please check if the strip light voltages is the same as the power volts.
- ▶Connect the light strip with 4 pin plug on the one side,and plug it into the USB port that any one can drive it. 【ONLY suitable for 5V led strip with 5V power supply】
- ▶Tips: Because the line order of each factory RGB light bar is not uniform, our controller line sequence is RGB. The problem that the controller does not correspond to the strip light can be solved. First, turn off the switch, then press the button in the lower right corner, the strip light will flash, then press the three keys RGB to adjust to the color you want, if it does not correspond for the first time, repeat it a few times.
