Product Review
Specifications:
Working temperature: -20-60℃
Suooly voltage: DC12V
Product size: L62xW35xH23mm
Package size：L105xW65xH55mm
Net weight: 60g
Gross weight: 70g
Output: Three CMOS drain-open output
Connecting Mode: Common anode
Max load current: 2 A each color
Warning:
1.Supply vlotage of this producr is DC12V never connect to DC220V.
2.Never connect two wires directly in case of short circuit.
3.Lead wire should be connected correctly according to colors that connecting diagram offers.
4.Warranty of this product is one year,in this period we guarantee replace ment or repairing with no charge,but exclude the artificial situation of damaged or overload working.
Low voltage operation, can be compatibly use on any device of USB interface. Not for safety concerns.Please be sure of your power adapter amps is suitable for your led strips
Package Included:
1 × 24Key USB Remote Controller For led strips.
- Working voltage: DC 5V, the light strip and power supply must both be 5V (Input voltage 5V = Output voltage 5V). Simple connection, easy control, remote control distance is 10 meters.
- 16 Colors, adjustable brightness, On/Off, 5 Light Patters: Flash, Strobe, Fade, RGB Smooth-change, Static.16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change. IR Remote.
- The volts of the power supply must correspond to the volts of the strip light！！！If very dim, only displays red color. Please check if the strip light voltages is the same as the power volts.
- Connect the light strip with 4 pin plug on the one side, and plug it into the USB port that anyone can drive it. [ONLY suitable for 5V led strip with 5V power supply]
- Tips: Because the line order of each factory RGB light strip is not uniform, our controller line sequence is RGB. The problem that the controller does not correspond to the strip light can be solved. First, turn off the switch, then press the button in the lower right corner, the strip light will flash, then press the three keys RGB to adjust to the color you want, if it does not correspond for the first time, repeat it a few times.
