Product Review

Model# FX402
The Fpower 120 Volt Submersible Utility pump is designed for numerous residential uses including flooded basements, window wells, spas, cisterns, sumps, fountain, garden pond, swimming pool, fish tank and flooding in low lying areas. Corrosion resistant thermoplastic constructed for long life. With automatic shut off tethered float switch for worry-free water removal. Capable of removing water down to 3/8 inch of surface and handling solids up to 1" diameter.

❤ PRODUCT INFORMATION
☞Material: Thermoplastic
☞Voltage/Frequency:120V/60HZ
☞ Horsepower: 1/2 HP
☞ Max Flow Rate: 1980GPH
☞ Max Lift: 16.4 Feet
☞ Max Submersible depth: 23Feet ☞ Max Grain: 1"
☞ Power Cord Length: 10Feet
☞ Discharge : MNPT 1-1/2",Hose barb 1-1/4",MNPT 1", hose barb 1"
☞ Water temperature: 320F - 1200F(00C - 490C)

❤PACKAGE INCLUDED
☞ Submersible utility pump x1
☞ Hose adapter x1
☞ Detailed manual instruction x1

❤ OPERATION TIPS
☞ The water level must be approximately 2" deep for the pump to operate. Once the pump starts, it will lower the water level down to approximately 3/8" of the surface. And the pump should be turned off once the water reaches 3/8".
☞ Do not run the pump dry. Otherwise would cause the motor to overheat or damage to the internal parts.
☞ Not recommended for pumping liquids over 1200F. The thermal overload protector will automactically shut down the pump in an overheat situation and reset itself once the pump cools down. The safty device will fail after repeated use in an overheat situation.

❤ WARRANTY: Provide a 12-Month warranty service. Please contact us if you have any question, we will respond within 24 hours.