ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 * 1232 UXGA, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIY

Parameters:

ESP32 Chip:<...

Buy Now From Amazon

Product Review

ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 * 1232 UXGA, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIY

Parameters:

ESP32 Chip:
Dual-core Tensilica LX6 microprocessor
Up to 240MHz clock frequency
520kB internal SRAM
4MB Flash memory
Integrated 802.11 BGN WiFi transceiver
Integrated dual-mode Bluetooth (classic and BLE)
Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
CP2104 USB TTL

OV2640 sensor:
Standard SCCB interface, compatible with I2C interface
Output Formats(8-bit):
YUV(422/420)/YCbCr422
RGB565/555
8-bit compressed data
8-/10-bit Raw RGB data
Maximum Image Transfer Rate
UXGA/SXGA: 15fps
SVGA: 30fps
CIF: 60fps
Scan Mode: Progressive

Camera:
CMOS size: 1/4"
Field of View : 78°
best sensor resolution: 1600 * 1200
IO voltage: 1.7V-3.3V
Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core)
Power Consumption: TBD Sleep andlt;20μA
Temperature Operation: -30°C to 70°C
Stable work: 0°C to 50°C
Maximum rms rate: 15fps SXGA
Sensitivity: 1.3V/(Lux-sec)
Signal to noise ratio: 40 dB
Dynamic range: 50 dB
Scan Mode: Progressive
Electronic exposure: Line 1 to Line 1247
Pixel area: 2.2μm x 2.2μm
Dark current: 15mV/s at 60°C

Package Including:
1 * EESP32 Module Development Board with OV2640 Camera

  • ★User Guide: https://docs.m5stack.com/#/en/quick_start/m5camera/m5camera_quick_start; ★IDF development environment, ★Demo: github.com/m5stack/esp32-cam-demo; ★Datasheet:https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdfMPU6050.
  • ★M5Stack ESP32 Camera: The M5Stack ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip and it can be used with lithium battery (Standard voltage: 3.7V4.2V).
  • ★OV2640 Camera Module: The camera is CMOS camera, CMOS size: 1/4", field of view : 65 degree, maxmium Pixel: 200M pixels (Because of the small RAM, the board can't obtain it. It can output images up to 800*600 JPEG.)
  • ★OV2640 Sensor 's Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive.
  • ★For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups.

Similar Products

ESP32 Cam WiFi&Bluetooth Camera Module Development Board with OV2640 Camera Module - 2 PackHiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDEHiLetgo FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for ArduinoCanaKit Raspberry Pi 4 Basic Kit (2GB RAM)MakerHawk ESP32 Camera Module T-Camera ESP32 WROVER PSRAM Camera Module 4MBytes SPRAM ESP32-WROVER-B OV2640 Camera Module with 0.96 Inch OLED-Fish-Eye LensESP32-CAM Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module and 8dBi Wireless Network WiFi WLAN Antenna + IPEX to RP-SMA Pigtail CableTTGO T-Camera ESP32-WROVER-B OV2640 Camera Module ESP32 WROVER & PSRAM Camera Module 0.96 OLED ESP32-WROVER (Fish-Eye Lens)MakerFocus ESP8266 OLED WiFi Development Board 0.91 Inch ESP8266 OLED Display CP2102 Support Arduino IDE ESP8266 NodeMCU LUAMakerFocus ESP32 Camera Module,Including OV2640 Camera,ESP32 WROVER and PSRAM Flash, Type-C Grove Port Mini Camera Development Board Building Brick IOT DIYESP8266 NodeMcu ESP8266 Module (4pcs),ESP-12E NodeMcu LUA CP2102 Internet WiFi Development Board Works with Arduino IDE/Micropython