Product Review

Portable and Convenient

The tire inflator pump is portable. Low-voltage and fast filling. It cannot only be used for any automobile tires inflating.
But also applies to motorboat,motorcycle,bicycle and other tourism entertainment products such as balls etc.
Then product is small, portable and easy to operate, filling air in tires fast and meets the requirement of many different models of cars.

Specification

Rating power: 120W
Maximum pressure: ≥90 psi
Hose length:500-20mm
Ambient Temp：-20℃~+60℃
Product size:165x170x63mm
Rating voltage: DC-12V
Max.Current: 10A
Cable length: 10 ft
The gauge accuracy: 220-15KPa
Net weight: 0.75 kg
Continuous working time: 30 minutes

Operating Instruction

1.Start the car engine before using.
2.Insert the plug of the compressor into the car socket(Cigarette Lighter Socket)
3.Connect the nozzle of the compressor to the nozzle of the tire. Be cautious that the fitting is tight enough.
4.Open the power off and take-out the nozzle from the tire and store away to use again next time.
5.3 ways of using the LED light. Press the light button to change them one by one to these modes.

Warm Tip

1.Please don't use the Air Compressor if anything appears abnormal.
2.Confirm the correct tire pressure maximum and recommended values for your car that us required before inflating(consult your car manual for verification).
3.To keep the air flow un-interrupted, don't bend the hose during usage.
4.In order to ensure the battery has enough power, please do not turn off car engine during use.
5.Please do not sustain the working time over 30 minutes at one time. If it has been in use for over 30 minutes, please shutdown the compressor and allow it to cool for 20 minutes before re-using.