Product Review

Install step:

1. To install the bar, put a plastic bushing on each end of the bar, aligning the screw holes on the plastic bushing with the screw holes on the ends of the bar.

2. Position the bar where it will be installed, making sure to position the ends of the bar where it is safe to drill/screw into the wall.

3. Make markings for each of the screw holes on the wall.

a. If anchors are needed (e.g., when installing in drywall), drill appropriate size holes for the anchors and install anchors in the wall.

b. If anchors are not needed, drill appropriate size holes for the screws.

4. Hold the bar in place over the holes and install screws firmly.

Specifications:

Dimensions: Grab Bar Length: 15.75inch /40cm including the base; bar diameter: 1 inch / 2.5cm , base diameter:2.16inch/5.5cm.(Note: Please kindly check the size in the picture in detail)

Material: Stainless Steel

Install: Wall mounted, come with screws

Package:

1*Grab Bar with Screws

Note:

Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid.