Product Review
â‘ BUILD-IN CLUTCH disengages from drive-in function while reaching the workpiece.
â‘¡ Line up the screw, put this driver on the screw, then start drilling.
â‘¢ It'll click when it reaches the depth, but if you lift off now it'll strip the screw a little. Instead, let the drill stop, then lift.
â‘£ The clutch is position sensitive, so it disengages when it hits the wood, but reengages when you lift off.
âš Takes a couple tries to get used to, but not complicated.
âš To remove and change the screwdriver bits, you simply need to pull out the bit with pliers and insert the new hex 1/4 bit.
âš Every standard hex 1/4 and 1 inch long screwdriver bit type can fit in the setter tool.
âš Setter tool comes with 4pcs top quality impact ready PH2 bits.
You can also use your own Torx, Allen, Slotted, Robertson or other types of 1" bits.
- ★【CONVERTS ANY ELECTRIC DRILL INTO A POWERFUL SCREWGUN】 – ¼ quick-change shank is designed to work with POWER DRILLS or HAND DRILLS, and reduces slipping in standard drill chucks (max. 2450 RPM)
- ★【EASY DEPTH ADJUSTEMENT】 - Set drywall, plywood and deck screws just right for depth. Enables to sufficiently countersink and counterbore screw heads precisely into any panel products. Depth adjustment works very easily and precisely with two threaded aluminum collars, main collar works as a stopper and the locknut collar as friction lock. (Stopper collar may leave a circular mark on the piece being worked on so it is recommended to work primarily on unfinished surfaces with screw setter tools)
- ★【THE SCREWDRIVER BIT IS REMOVABLE AND REPLACABLE】 – No need to replace the entire tool, most standard 1/4 hex 1" bits fit in. 4pcs of 1” Phillips #2 REAL IMPACT BITS come in the package. These bits are MAGNETIZED and easy to work with. Manganese Phosphate Coated bits offer excellent wear resistance and they are corrosion proof even in humid climates.
- ★【BUILD-IN CLUTCH】 disengages from drive-in function while reaching the workpiece. line up the screw, put this driver on the screw, then start drilling. It'll click when it reaches the depth, but if you lift off now it'll strip the screw a little. Instead, let the drill stop, then lift. The clutch is position sensitive, so it disengages when it hits the wood, but reengages when you lift off. Takes a couple tries to get used to, but not complicated
- ★【TO AVOID WOBBLING OF THE SCREWDRIVER BIT】, C-ring built inside of the chuck holds the bit tightly. Please use pliers to pull off the bit if it needs to be replaced.
