Car Rear View Mirror Dash Cam Mount Holder
For those who installed tint on their front windshield and worry about using a suction cup mount to mount their dashcam, Anumit dash cam mirror mount is the solution. won...

Buy Now From Amazon

Product Review

Car Rear View Mirror Dash Cam Mount Holder
For those who installed tint on their front windshield and worry about using a suction cup mount to mount their dashcam, Anumit dash cam mirror mount is the solution. won't damage your car tint. won't fall like when using suction cup mount and parked under the sun.

Widely Applicable models
Come with 16 different joints, suitable for AUKEY, Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.(Including but not limited to).

NOTE: Only compatible with domestic vihicles with mirrors that have a cylindrical shapped stem at least 0.4" long

Easy to install and remove
Tool-less and easy to install, the product can be installed or removed within minutes thanks to the thumb screws

Easy angle adjustment
Adjustable ball and socket joint, real 360-degree rotation design, adjust to any angle you need.

Specification:
Material: Plastic and rubber
Weight: 4.9 oz
Clamping Diameter range: 0.5- 2.6 inches


  • ☑️ PERFECT COMPATIBILITY: New 16 different joints kit suitable for 99% (NOT ALL) dash camera, Action Camera, GPS and more. The ball dia of the dash cam mount is 0.63inch. ⚠️For easy installation, please make sure the car rearview has (MORE THAN 0.4 INCH) space on the back of the mirror.
  • ☑️ BEST DASH CAM COMPANION: Mount your dash cam behind the center of the windshield to make a safe driving, since it allows them to record a clear unobstructed view ahead and doesn't interfere with the view when driving.
  • ☑️ STRONG PIPE MOUNT: Tool-less and easy to install & removed, the mirror dash cam mount would be easy to lock on car rear view mirror/bike/motorcycle handlebar and any round pipe dia, Come with two long screws and two short screws, From 0.5- 2.6 inches. ⚠️Kindly check pictures for reference before purchased.
  • ☑️ 360° ROTATION FREEDOM: Adjustable ball and socket joint, real 360-degree rotation design, adjust to any angle you need, be it horizontally or vertically, the dash cam mirror mount is completely at your disposal.
  • ☑️ ANTI-SKIDDING AND PROTECTIVENESS: Position fixing with practical locking nut, durable construction prevents slipping and breaking and heat-resistant, dashcams for cars never fall off the windshield.

Similar Products

APEMAN Dash Cam 1080P FHD DVR Car Driving Recorder 3" LCD Screen 170° Wide Angle, G-Sensor, WDR, Loop Recording, Night Vision,Motion DetectionDash Cam Mirror Mount, Fit for 99% Dash Cam/DVR, for YI 2.7", Rexing V1, AUKEY, UGSHD, Z-Edge, Old Shark, Crosstour and Most Other Dash CameraDash Cam Mirror Mount - Fits Falcon F170HD,Rexing V1, Z-Edge, Old Shark, YI, Amebay,KDLINKS X1,VANTRUE and Most Other Dash CamerasDual Dash Cam Front and Rear,DareTang Full HD 1080P Car Camera DVR with 4 Inch LCD Screen/170°Wide Angle/G-Sensor/WDR/Parking Monitor/Loop Recording/Motion Detection,Dashboard Camera RecorderDual Dash Cam Front and Rear, 1080P Full HD Car DVR Dashboard Camera Recorder with Night Vision, 3 inch IPS Screen, 170 Super Wide Angle, G Sensor, Parking Monitor, Motion Detection, WDRSanDisk Ultra 32GB microSDHC UHS-I card with Adapter - 98MB/s U1 A1 - SDSQUAR-032G-GN6MASamsung 32GB 95MB/s (U1) MicroSD EVO Select Memory Card with Adapter (MB-ME32GA/AM)Dash Cam Hardwire Kit, Mini USB Hard Wire Kit Fuse for Dashcam, Plozoe 12V-30V to 5V Car Dash Camera Charger Power Cord, Gift 4 Fuse Tap Cable and Installation Tool(11.5ft)Roav DashCam A1, by Anker, Dash Cam, Dashboard Camera Recorder, 1080p FHD, Nighthawk Vision, Wide-Angle View, Wi-Fi, G-Sensor, WDR, Loop Recording, Night Mode, and Dedicated AppZ-EDGE Dash Cam Front and Rear 4.0" Touch Screen Dual Dash Cam FHD 1080P with Night Mode, 32GB Card Included,155 Degree Wide Angle, WDR, G-Sensor, Loop Recording