Product Review

10 Packs Black,white and red Sheets HTV Iron On Vinyl
Size: 10"x12" (25x30cm)/sheet
Package: 3x Black sheets;3x White sheets,4x red sheets
Most fabrics are suitable(cotton/polyester/cotton blend fabric)
Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the material
How to use it?
1.Mirror/Reverse your image design.
2.Place vinyl (gloss side) onto cutting mat.
3.Cut your favorite design with the craft cutter or other carving machines.(Suggest to Set 0 to 1 degree blade depth of cutting machine)
4. Weed the excess material by weeding tweezers from the design.
5. Put the garment on the even surface and place the design on the garment at the desired position.
6. Apply the target design with iron, recommendations for transfer: (Temperature: 150℃(302℉) to 160℃(320℉) Pressure: Medium, Time: 8 -15 seconds ).
7.Place the teflon sheet over the HTV and iron away to protect garment.
8.Disperse the iron's heat evenly.
Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image.
9. Wait for the vinyl to cool and gently peel off backing after few minutes. Do not dry clean.
Care Instructions:
Hand wash your fabric gently with mild detergent
Wait 24 hours after application to wash
Turn the article of clothing inside before you wash it
No bleach
Tips:
We recommend you to perform a test prior.
Adjust proper blade speed; cutting press; temperature of heat press or iron; pressure of heat press.
Any question please contact Vinyl Frog first,we will try our best to slove for you.