Product Review

Specifications:
Material: Electroplated glossyPVC
Colour: Electroplated glossy silver
Length: 5m(16FT)
Width: 10mm (0.39inch)
Rim thickness: 7 mm (0.28inch)
Taking a range of 1.0mm to 2.5mm(0.04inch to 0.099inch)
Installation location:
1.The metal edge of the main body between the car door and the vehicle body.
2.In the car door and more of the outer edge.
3.In the window above the car.
4.Window panel minibus.
5.Border heavy equipment.
6.Covering the edge of the sharp metal.
7.Vinyl window decoration boat.
How to install:
1.Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing.
2.Uncover the tape from the tip of the lining (Ensure the tape is install inside the door).
3.Start from the top, insert the lining onto your door edge until the lining is fully seated.
4.Press the lining with your thumb along the door edge until it is fully seated.
5.Repeat step 4 until all edges are protected.
6.Use scissors to cut away unused lining for other door edges.
7.Let the lining dry up by itself and do not get wet for at least 12 hours.
Package Included:
1x 5M PVC Edge Trim
2 packs of adhesion promoter
About COOL·CAR:
COOL·CAR store highly appreciates all customers' opinions to improve the selling, also if anything you unsatisfied, please contact our customer service department for probable best solution.Scroll up