Product Review
Hose Length:
8ft Braided Hose
Product Instructions:
Note: To ensure your safely, please adjust the regulator to 0 PSI (Off the regulator) firstly before you installation.
1. Using the black plastic fitting insert and rotate clockwise to your QCC1/Type 1 propane tank connection place.
2. Taking the regulator hose end connect to your 3/8'' male flare connector propane appliance.
3. Checking this hose both end must be fully tightened.
Product Specification:
Certificate : CSA
Gas Type : LP/LPG
Regulator Type : High Pressure
Outlet Pressure : 0-20 PSIG
Inlet Pressure :25-250 PSI
Flow Capacity : 120000 BTU/Hr
Hose Length : 8 feet/ 96 inch
End Connector : 3/8" flare swivel nut; Hose connection: 5/8"-18UNF
NOTE: For Your Safety, Please Check and make sure the hose is away from the OPEN FIRE and HIGH TEMPERATURE place before installing it to your appliances.