RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect

Product Review

System Voltage: 12V 24V Auto
Charge current: 60A
Max input voltage: 24V(12V system); 48V(24V system)
Max input power: 780W(12V system); 1560W(24V system)
USB output: Dual USB output, 5V/2.5A
Batteries:Only fit for OPEN, AGM, GEL
Self-consume: <10mA
Temperature: -35â„ƒ~+60â„ƒ
Size/Weight: 193mm*51mm*98mm/390g
Float charge: 13.7V(defaul, adjustable)
Discharge reconnect voltage: 12.6V(defaul, adjustable)
Discharge stop voltage: 10.7(defaul, adjustable)
Turn ON/OFF light voltage: Solar pannel 8V.

Load mode:

1. ã€24Hã€‘ Load always turn on. [except your battery's voltage is too low to read]
2. ã€0Hã€‘Light control mode. [controller recognize voltage auto, if solar panel's voltage under 8V, Load will turn on]
3. ã€1-15Hã€‘Light controller+ Set an specific time to turn off your load.

MENUï¼š1. Press to browse parameters. 2.Press and hold about 3 seconds to enter detail setting

UP: Press to increase value

DOWN: Press to decrease value

TIPS OF INSTALLTION: (ALWAYS CONNECT BATTERY FIRST!!)

Step 1, Screw the adjustment screw counter clockwise until the plates moves down.
Step 2, Please peel off the coating of the cable tip by about 8 to 10 mm, then insert the wire into the new opening between the plate and the "top" of the Terminal hole, not under it.
Step 3, Screw the adjuster clockwise and the plate will move upwards thereby squishing the wire in the Terminal hole, Make sure all connections are tight.

NOTE :Please Make sure your battery has enough voltage before first installation.(at least 60%)

❶This 60a charge controller compatibility with 12V 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float),12V(780W)/24V(1560W) input,Dual USB can give your electronic product max 5V 2A.(This controller is on the way to Amazon oversea house,we will arrange Amazon deliver to you)
❷Backlight LCD display PV/Battery/Load charge and discharge parameter.Adjustable Floating voltage/LVD/LVR/Load Timer according needs for this charge controller.ADD Feature: Charge and Discharge Current,Charge and Discharge energy recording
❸This 60a solar charge controller fit for Lead-acid batteries(OPEN,AGM,GEL) with mutiple load timer.Load should be DC. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
❹PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial,commercial etc.
❺12 months honor warranty from PowMr and 24hrs after service.Your satisfaction is our priority.Our email is [email protected] us if you have any question.

Track Price :: Reviewing Millions of Products!

PowMr 60a Charge Controller - Solar Panel Charge Controller 12V 24V,Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off Solar Regulator with 5V Dual USB(CM-60A)

Product Review