Product Review
Sometimes when we are sanding smaller objects, we need, well, a smaller piece or just a strip of sandpaper. We could always cut one of our expensive 9" x 11" sheets and hopefully not cut too much off. Or you can reach for the correct grit inside the box dispenser and tear off just the right amount for your project. Each grit roll is 1" wide and is flexible enough to be used on most any shape. These abrasive strips work exceptionally well on rounded objects such as turned pens, bottle stoppers or any other smaller type of turning. They also work on most any type of material and can be cut to any length needed. Stepping your abrasives from low grit to high grit is an essential process for finishing your pens, pencils, bottle stoppers or any wood project in the proper manner. Each roll is made from hard to find J-weight cloth backed sandpaper. Available in: 150x, 240x, 320x, 400x, & 600x. The metal dispenser is made from galvanized steel and is marked for clearly and easily identifying grits. It also comes with a compressed cardboard tube for sliding replacement rolls directly on to it.
- Sometimes when we are sanding smaller objects, we need a smaller piece or just a strip of sandpaper. We could always cut one of our costly 9" x 11" sheets and hopefully we won’t cut too much off. Typically we also leave a lot of wasted paper too and end up throwing the excess away.
- Using these strips along with the steel dispenser you can reach for the correct grit inside the steel dispenser and tear off just the right amount for your project. Each grit roll is approximately 1" wide and is flexible enough to be used on most any shape or type of project. These abrasive strips work exceptionally well on rounded objects such as turned pens, bottle stoppers or any other smaller type of turning.
- Not only de these 1 inch wide sandpaper rolls work great on small items, thee work exceptionally well on projects that are still on your lathe. Simply turn your lathe on to a lower speed and slowly work the sandpaper back and forth until you achieve the desired smoothness.
- Stepping your abrasives from low grit to high grit is an essential process for finishing your pens, pencils, bottle stoppers or any wood project in the proper manner. Simply start with the lower grit of 150 grit and step your way up using each grit in the process all the way up to 600 grit for optimal sanding results.
- Each roll is made from hard to find J-weight cloth backed sandpaper. The fine grits that are included are as follows: 150 grit, 240 grit, 320 grit, 400 grit, & 600 grit.
