Product Review

How to use?

STEP 1 WASHING

Before using Precision Pour Liquor pours, soak them in warm soapy water for approximately 5 minutes. Do NOT place in a dishwasher or use water that is too hot to touch. After washing, rinse pours thoroughly in cold water.

STEP 2 INSERTING

If pours have dried, dampen them with cold water before inserting. When inserting a pour into a bottle, twist slightly and push until snug. Typically, only three rings of the cork will fit into the bottle. Some bottles (1.75 liters, Absolut vodka, etc.) require all four rings inserted to prevent leakage. If the bottle is too large to insert the pour, make an adapter from the cap of the bottle.Never force the pour into the bottle, as it may crack or break.

STEP 3 PRIMING

Prime the pour by holding a finger over the spout and quickly turning the bottle over. Prime pours before the first use and after each cleaning. If the pours are not primed, the first shot poured may not be measured accurately.

STEP 4 POURING

When pouring, turn the bottle in a smooth motion to a 45-60 degree angle (approx. 2 o'clock). Precision Pours are designed to pour fast, but, as with any liquor pour, never whip the bottle into pouring position.