Product Review

Specifications:

Thread of 5/8''-18UNF Inlet & Outlet
750mm thermocouple with M8*1 threaded head
Bakelite knob OD 38mm, D shaft 6.1mm

Operation Instructions:

1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange.
2). Connect your inlet and outlet hose on inlet and outlet side. (fix it tightly enough in case of gas leakage)
3). Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy)
4). Connect thermocouple and end thread well
5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it work properly If when you release hand, gas valve shut off again, please check
a. If your thermocouple is always be heated on flame
b. If the thermocouple end is well connected with valve
c. If the inlet and outlet side well connect with hose you have

Package Included:

1 Pc x Gas Control Valve with Thermocouple and Knob Switch