Product Review

Mechanical Specification:
Weight: 158g(5.57 OZ)
Dimension: 65*30*48mm(2.56*1.18*1.9 inch)
Gear ratio: 279
Connector wire: 300mm(11.8 inch)

Electrical Specification:
Working Voltage: 6-8.4V
Operating Speed (at no load): 0.17 sec/60°@6V; 0.15sec/60°@7.4V; 0.13sec/60°@8.4V
Stall Torque(at locked): 58 kg·cm (805 oz·in) @ 6.0V; 65 kg·cm (902 oz·in) @ 7.4V; 70 kg·cm (972 oz·in) @ 8.4V

Control Specification:
Control Method: PWM
Pulse Width: 500~2500µsec
Neutral position: 1500µsec
Dead band width: 3 µsec
Operating  frequency: 50-330Hz

Please make sure that the pulse width of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degrees

Wire Layout:
Red Wire: +
Black Wire: GND
White Wire: PWM/Signal

Package Contents:
1 x Digital servo
1 x Servo horn kit(as shown in the image)

Tips:
1. Please use Li-Po battery to power the servo, Do Not use dry battery, otherwise the servo will move slowly or not at all(our servo has higher torque, so it also need more powerful power to drive itself).
2. Please use short and thick power cord, Do Not use Dupont cord
3. Our servo can be controlled by Arduino, please refer to the Arduino library.

If you have any questions, please feel free to contact us at [email protected], we will help you as soon as possible