Product Review

AUVON Lancing device for blood testing.

The feature of AUVON Lancing device
1: Multi-track design for less pain.
2: Rubbing design for less pain.
3: One-Button Lancet Rejection.
4: Precision depth setting.

How to use:
Preparing your lancing device
1: Pull off the cap. Carefully remove the cap from the lancing device
2: Insert a lancet & remove its cap. Insert the lancet into the lancet holder, push until the lancet comes to a complete stop inside the device.
3: Place device cap back.
4: Personalize penetration depth. For fingertip lancing, you can adjust the depth of puncture setting if necessary
5: Pull out the button.
6: Cock the lancing device. Pull the cocking handle out until clicks, If it does not click, it may already have been cocked when you inserted the lancet.

Lancing fingertips
7: Prior to sampling blood, wash your hands and the simple site with soap and warm water. Rinse and dry your hands completely.
8: Punture your finger. Press the lancing device firmly against the side of your fingertip to be lanced. Press the release button. Remove the lancing device from your finger.
9: Get a round drop of blood.
Removing and disposing of the used lancet
10: Remove cap. Carefully remove the cap from the lancing device. Be careful not to touch exposed needle on the lancet.
11: Eject the lancet. Simply eject the used lancet with a push and dispose of it according to local regulations.

Use precautions:
1: Never share a lancet or lancing device with another person.
2: Make sure to wash the puncture site with soap and warm water before sampling.
3: Always use a new, sterile lancet. Lancets are for single use only.
4: For single person use only. Not for clinical or multi-patient use.
5: Keep your lancing device clean. Hand lotions, oils, dirt and debris on or in the lancing device may prevent the device from working correctly.