Potok Resistance Band Set, 3Pack Latex Elastic Bands for Upper & Lower Body & Core Exercise, Physical Therapy, Lower Pilates, at-Home Workouts, and Rehab, Yellow & Red & Blue (1.2m/4ft)

Product Review

Two conditions must be met at the same time before purchase:
1: Your original motor base must be 7 fins;
2: Your blender model must identity with our stated model.
-Only compatable with 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
-Not fit BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
-The Nutra Ninja Replacement Blade can't fit all the 7 fins blender's motor base:
-There are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don't purchase it

Pay attention to before use :
1. Before use, PLEASE check if the bottom gear is loose or tightened. If loose, tighten.
2.Check the rubber gasket, which is used to avoid leakage and make sure that it fits snugly against the bottom blade.
3.Place the replacement blade on the cup and tighten until tightly sealed.
4.Make sure it is in the correct position and locked.
5.Do not run the mixer for more than 4 minutes each time to prevent the mixer from overheating.
6.Be careful of the blade when open the package.

- You are recommended to replace your ninja blender every 6 months or as needed for optimal performance

Packing including:
1x 7 Fins Bottom Blade Replacement
2x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade).

1.Nutri Ninja Replacement Parts - Pro Extractor Replacement Blade by Eyeworld. 7 Fins, 4"/10CM diameter, 165g, made of food grade PP and stainless steel
2.Ninja Blade Apply to: 7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing)
3.Warm note: 1. The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade; 2. Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you're going to use this replacement gaske; 3. Be careful of the blade when open the package.
4.NOT COMPATIBLE IF "DOB" is listed after the model number on the base of the blander
5.100% SATISFACTION GUARANTEE & Packing Include: 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). If you are buying before or after purchase any questions, please feel free to contact us, our customer service are always at your service.

Track Price :: Reviewing Millions of Products!

Eyesworld 7 Fins Replacement Parts for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Series Blenders (Black)

Product Review