1/4"-20 threaded insert wood insert furniture screw in nut connector screws


Thread Type: 1/4"-20
Total Length: 15mm
Insert head diameter: 11.7mm
Insert Threads Diameter: 10.4mm
Body Diameter: 0....

Buy Now From Amazon

Product Review

1/4"-20 threaded insert wood insert furniture screw in nut connector screws


Thread Type: 1/4"-20
Total Length: 15mm
Insert head diameter: 11.7mm
Insert Threads Diameter: 10.4mm
Body Diameter: 0.315" / 8mm.
Material: carbon steel, zinc plated


▲▲▲ -Suggested Drilling Hole for Soft Wood: 8.5mm, 9mm, 3/8".
▲▲▲-Suggested Drilling Hole for Hard Wood: 3/8", 10mm.


★★★NOTE: SIZE of drilling hole depends on the Hardness of the Material★★★

★★★Please drill a proper hole, test to check if inserts fit appropriately.


★★★ ★ In Softer wood, the outside threads cut easily into the wood, simply drill a proper hole size (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place.

★★★ ★ In very Harder wood such as white oak or maple, drill a hole size (3/8", 9.5mm, 10mm drill bit) that close to the outside threads diameter.
If the drilled hole is too small for the threads, screwing it in MAY split the wood or insert.

Package comes with 40pcs wood insert nut + 1pc 6mm allen wrench.

  • 1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws.
  • Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm.
  • Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided.
  • In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place.
  • In very Harder wood such as white oak or maple, drill a hole size (3/8", 9.5mm, 10mm drill bit) that close to the outside threads diameter, then screw insert into the place. If the drilled hole is too small for the threads, screwing it in MAY split the wood or insert.

Similar Products

Shepherd Hardware 9908 1-Inch Felt Gard Threaded Stem Furniture Glides, 1/4-Inch Stem Diameter, 4-Pack1/4"-20 T-Nuts | 100pc | by Bolt Dropper, Pronged Tee Nut. for Wood, Rock Climbing Holds, CabinetrySNUG Fasteners (SNG879) Fifty (50) #8-32 Zinc Hex Flanged Threaded Inserts for Wood | .394" LengthPOWERTEC 71168 T-Track Hold Down Clamps, 5-1/2” L x 1-1/8” Width – 2 PackE-Z Lok Threaded Insert, Zinc, Hex-Flanged, 5/16"-18 Internal Threads, 0.512" Length (Pack of 50)E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Hex Bolts and Washers(Set of 10)40Pcs Anwenk 1/4"-20 x 15mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment (with Hex Spanner)POWERTEC Tee 1/4-Inch-20, 2-1/2-Inch, 20-Pack QTB1005 T-Slot 1/4”-20 Thread Size T-Bolt 2.5 Inch Long – 20 Pack, 20 x 2-1/2"Hard-to-Find Fastener 014973445744 445744 Joint Connector Bolt, 1/4-20 x 1.57", Black, 10