Product Review

Important Information before your Purchase
DO NOT SUPPOT LT, HT and Truck Tires.
It is for 12 Volt DC ONLY. Don't support 24 Volt.

Specification:

Working voltage: DC12V
Rating power: 120W
Inflating Speed: 30L/min
Min. Amp: 10 Amps
Maximum Amp: 15 Amps
LED flashlight: 3 LED lamp beads
Maximum Working Pressure 120 PSI
Display Units: PSI, BAR
The power cable is with a 15 amps fuse, if you need to replace the fuse, please contact us to get free.

Operating Instructions:

1. Make sure the power switch is at OFF position and the car vehicle engine is running.
2. Remove the dust cap from the tire valve, and then attach the air chuck to the tire valve stem, and screw onto tire's valve stem.
3. Plug the power cord into a 12V cigarette lighter socket.
4. Press (Set) button to choose the display unit. Long press the (Set) button to enter the preset settings. Press (-) or (+) button to set the desired pressure, and then wait until it stops flashing.
5. Turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
6. When the desired pressure is reached, turn off the power.
7. Unscrew the valve connector, place the tire valve dust cap back to the tire & disconnect the power cord from a 12V cigarette lighter socket.

Package Include:

Air Compressor Pump x 1;
Adapter for Balloon x 1;
Ball Needle x 1;
Storage Bag x 1;
User Manual x 1 (Please read the user manual carefully before the first use)