Quimat Q15001 oscilloscope is an Assembled finished Machine. Some similar products are DIY PART, should assemble before using. The Quimat Q15001 oscilloscope can be used directly to avoid assembling welding process problems ...

Buy Now From Amazon

Product Review

Quimat Q15001 oscilloscope is an Assembled finished Machine. Some similar products are DIY PART, should assemble before using. The Quimat Q15001 oscilloscope can be used directly to avoid assembling welding process problems and greatly saves the assembly time. Specification: Number of Channel: 1 Analog Bandwidth: 0 - 200KHz Sensitivity: 5mV/Div - 20V/Div Sensitivity error: Resolution: 12-bit Input Impedance: 1M ohm Maximum Input voltage: 50Vpk Coupling: DC, AC, GND Trigger Modes: Auto, Normal, Single Trigger Types: Rising/falling edge Trigger Position: 1/2 of buffer size fixed Display: 2. 4 inch color TFT LCD with 320 x 240 resolution Power Supply: 9V DC (8 - 10V acceptable) Dimension: 115mm X 75mm X 22mm Weight: 100 gram (not including cables and power supply) Package Contents: Oscilloscope * 1 BNC-clip cable * 1 Users Manual * 1 Kindly note: Runs on 9V (do not use power voltage higher than 10V! )

  • UPGRADED VERSION - Please Calibrate the oscope Before Use! The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld.
  • DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier.
  • ASSEMBLED FINISHED - AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
  • WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.

Similar Products

Signal Generator DIY Kit, KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable FrequencySumnacon 2 Pack P6100 100 MHz 600V DC High Sensitivity Oscilloscope Clip Probe 10:1 and 1:1 Switchable with Mini Alligator Clip and Ground Lead for Rigol Atten Owon Siglent,HP Tektronix,RIO DSO, Hitachi,GwInstekAUTOUTLET P6100 Universal Oscilloscope Probe with Accessories Kit 100MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead KitRioRand PP150 100 MHz Oscilloscope Clip Probes with Accessory Kit (Pack of 2)Elenco TL-3 BNC to Minigrabber Test Lead SetUL Listed 9V AC/DC Power Adapter for Arduino/Schwinn Bike A10 A20 A40 220 430 Elliptical Recumbent Upright Trainer/Crosley Cruiser CR8005A - Center Positive 5.5x2.1mm Power Supply Cord for UNO R3OCR 24Value 500pcs Electrolytic Capacitor Assortment Box Kit Range 0.1uF-1000uFKuman 30MHz High Precision Dual-Channel DDS Arbitrary Signal Waveform Generator Counter, 2.4in Screen Display,250MSa/s, 819214bits,Frequency Meter, VCO, Burst, Modulation Function FY6600Signal Generator, KKmoon DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth/ECG/Noise Output 1Hz~65534Hz Frequency Amplitude