After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 12V
P...

Buy Now From Amazon

Product Review

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350 degrees

Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.

Package listing:
3 x 12V 50W Ceramic Cartridge Heater


  • ➰Basic parameters:Voltage/Power: 12V/50W, Head length: 20mm, Head diameter: 6mm, Total length:1 Meter.
  • ➰The improvement compared to ordinary red heating tube: 1. From the 0.3 line to a 0.5 line thick white high temperature line, can withstand a higher temperature.
  • ➰From the original power from 50 W to 65 W, the maximum temperature increases from 300 - 31 °C to 340 - 350 °C. Can be used with the new temperature thermistor HT-NTC100K.
  • ➰The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel-chrome wire to achieve maximum durability.
  • ➰Tips:No plug required, no other splicing necessary, cut off the cover skin directly, decide how long you need, then connect it to the board.

Similar Products

WINSINN 24V 50W Heater Cartridge 620 Heating Tube HT-NTC100K Thermistor 1M for Ender 3 CR-10 Sensor Heater Block V6 J-Head Hotend Extruder 3D Printer (Pack of 5Pcs)[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.[Gulfcoast Robotics] 2 PCS MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer - Made by US company with quality and precision.Genuine E3D Thermistor Cartridge (E-SEMITEC-50-MOLEX)HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange[Gulfcoast Robotics] Aluminum Y Carriage Plate Upgrade for Anet A8 3D PrinterSignswise 5PCS Barrel M6 X 30 Teflon Nozzle Throat for MK8 Tube Makerbot 3D Printer Extruder Hot End