Product Review
How to Choose Your Transformer
1.Calculate the total wattage of your light fixtures in your plan
2.Choose the transformer that is large enough to support the total wattage you need
3.The transformer wattage load (total watts needed for your fixtures) should be within 80% of the rated capacity of the transformer.
For example: if you have 7 pack 13W landscape lights, so the total wattage is 91W. Then you can choose the transformer higher than 113W(=91W/0.8).
Automatic On/ Off
Attached with this transformer, the LED fixtures will turn on automatically at night and off in the morning.
1/2/3/4/5/6/7/8/9 hour countdown
Unlike other transformers with complicated digital timer, you just need press the select button to set 1/2/3/4/5/6/7/8/9 hour countdown.
Memory function
Memory function will make the transformer remain the mode you selected before.
Automatic Circuit Breaker
With built-in automatic circuit breaker, it will provide overload and short circuit protection effectively.
Easy to Install
Built-in hanging holes, 3.3ft STJW 18AWG power cord, mount it on outdoor walls directly.
Specifications
Input: 120VAC, 60Hz
Output: 12VAC
Max Power Rating: 120W
Packing List:
1 x Transformer
1 x Use Manual
2 x Screw
2 x Wall Anchor
Tips:
1.The dot(at the bottom right corner of the number on the display screen) will light on when it works.
2.The transformer has two outputs with a total power of 120W. You can choose any of them to connect with your cable.
NOTE:
(1) If the transformer does not connect with load, it shows no output at terminals. Please check your lights are connected or not before mearsuring voltage.
(2) Any longer than 150ft cable per tap is not recommended for connecting with DEWENWILS Low Voltage Transformer.