Product Review
Q: Do you wanna make your RC happier? Are you looking for universal upgrade pinion gear for your RC car?
A: We can help, we provide 3.175mm hole 48P pinion gear set comes with a set screw, they work well and have a secure fit with no modification needs. Package include: 1 X 48P 3.175mm 21T pinion gear 1 X 48P 3.175mm 22T pinion gear 1 X 48P 3.175mm 23T pinion gear 1 X 48P 3.175mm 24T pinion gear 1 X 48P 3.175mm 25T pinion gear 5 X 48P Screws 1 X Screwdriver Note:
💡ã€48P】is the pitch of each tooth on the pinion gear and the 21T 22T 23T 24T 25T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.
💡ã€3.175mm】The pinion gear shaft diameter or bore is 3.175mm, make sure your RC motor shaft have the same diameter.
💡Make sure you thread lock the grub screw. They are hard to find when they fall out.
💡Larger gears will result in higher speeds while smaller gears provide more torque.
For quicker acceleration go for a smaller pinion gear (with fewer teeth) and a larger spur gear (with more teeth).
Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC.
💡💡How to install the pinion gear:
You will probably need to loosen the motor a bit, in order to fit the pinion gear on. Make sure you lock it in place on the flat portion of the motor shaft.
When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear. That gap will be very small. It should be about the width of a piece of paper.
