Product Review

PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate; high impact strength and good liquidity (flows smoothly); Furthermore, this beautiful PETG filaments make prints come out with a little "shine" or "spark" to it.

Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.

FAQs:

Why can't the filaments stick to the build bed?

1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

4. If the effect is not good, it is recommended to try printing the draft before printing.

Specification: 

Temperature 

Recommended Extrusion/Nozzle Temp: 230°C - 250°C (446℉~ 482℉)

Heated Bed Temp: 80°C - 90°C (176℉~ 194℉)

Filaments Diameter and Accuracy: 1.75 mm +/- 0.05

Filaments Net Weight: 1 kg (2.2 lbs) 

Recommended Printing Conditions:

Cooling Fan: Turned on

Printing Speed: 30~50(mm/s)

Raft Separation Distance: 0.14(mm)

Retraction Distance: 1~3 mm

(Note：Based on 0.4 mm nozzle and simplify 3D V 4.0.; Printing conditions may vary with different nozzle diameters.)

Packaging Included:

1 × spool of PETG filaments 

1 × build surface