Product Review

Color:White

Product Name: iphone 6s screen replacement LCD Display

Installation Note:

1.Test the iphone 6s screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again.

2.Confirm the phone is power off before installation.

3.Do not press the left and upper corners of the screen, otherwise may cause lines on the screen.

4.Each screw should be installed into original location, because they are not same length! Never tighten screw over limit!

5.Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage!

If you meet with these issues: Can not turn on, touch insensitive, flash, lines on screen, ghost click etc.

Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables,
leave the phone alone for a while in a dry environment, a hard reset of your phone power on.

Package includes:

- 1 x New iPhone 6s LCD Screen and Digitizer

- 1 x Spudger

- 1 x Phillips #000 + 5-point screwdriver

- 1 x Plastic opening tool

- 1 x Small Suction Cup

- 1 x iphone 6s screen protector