Product Review
Color:Yellow
Application Instruction: -1.Choose your desired design , you must flip your design before cutting.
-2.Reverse the pattern and cut it onto the vinyl sheet with a craft cutter.
-3. Weed the excess material .
-4. Spread out the target apparel and put the design on the desired position.
-5. Heat and Transfer - press the iron or the heat is on the transparent polythene film(the bright side) of the design
Home Iron:
-Please Heat the iron on medium setting (302℉- 320℉);
-Press each section of the design with medium/firm pressure for 10-15 seconds;
Heat Press:
-Preheat garment for 2-3 seconds;
-Apply design at 305℉;
-Use medium pressure for 10-15 seconds;
-Wait for 15-30 seconds for the vinyl to cool down, and then peel the transparent polythene film .
If any part of the iron on vinyl lifts off, repeat the steps above until you can peel off the clear backing without lifting up the vinyl.
Warm Tips
1.Make sure there are no wrinkles on the material.
2.If you are having trouble, try turning the shirt 90 degrees and pressing again, this should eliminate problems from cold spots.
3.If you've already ruined one shirt, keep using it to experiment. Cut small pieces of heat transfer and try raising or lowering your temperature, or pressing longer or for less time.
4. Please wait for at least 24 hours to wash your design.
5.Clothes with a waterproof coating of all can not be printed ,metal products,ceramic,plastic,wood products can not be printed.








