Product Review

Feature

-All in one motorcycle speedometer mph black, speedometer/tachometer/odometer, multifunction Indicator light

-Waterproof, shockproof, anti-lightning, resistance to high pressure, with anti -UV & Anti-glare LCD screen, you can see very clearly in the evening

Specifications

-Diameter: 3.7 inches/ 95 mm

-Packing size: 4.3 x 4.3 x 4.3 inches/ 11 x 11 x 11 cm

-Shipping Weight: 0.9 pounds/ 0.4 kg

-Packing including 1 x digital motorcycle speedometer, 1 x Sensor, 2 x Magnetic steel, 1x Installation Instructions, with no mount brackets

Installation Note

-The default is 1 cylinder, if you set to 2 or 4 cylinder,it can not be changed to 1cylinder !!!!

-The rpm could not work if your motorcycle is "Kawasaki" and "Regal Raptor"  with Electronic injection engine

-The purple black wire of this item is the rpm wire, it should be connected with the positive rigger line of the igniter

-When you getting into the setup menu, with the key off, press and hold the button on the back and turn the key on.Keep pressing until you see CCC--- on the screen, you need to change it to CCC123, which is a passcode to get in to the programming. Short press to increase the value, and long press to move to the next digit

-The fuel level indicator (blue/white wire) uses a variable resistance ground (-), NOT a variable voltage (+) signal

-The RPM/tachometer (black/purple wire)

uses the pulse signal from the CDI to the ignition coil, NOT the switched 12V (+) power supply to the coil

-The neutral indicator (white/yellow wire) as well as all the gear indicators use a switched ground (-) signal, NOT a 12V (+) signal

-Wheel speed sensor/speedometer three pin male and female plug (white, green, and white black wires) is the easiest, just plug it in and leave it alone

-Professional installation is highly recommended if you have any difficult in installation!!!!