Product Review
Safety Instructions:
1. For indoor use only
2. The heater must notbe used if the plastic panel is damage.
3. Do not use near water.
4. This heater is not equipped with a device to control the room temperature.
Operate the Hater
1. Getting started
Read the instructions carefully. Plug the heater into a wall power socket, (220V-240V). Press the power switch on the side of the device.
2. Select the desired temperature
When the display screen shows the set temperature, press the "+" button on the heater or on the remote control unit to increase the temperature and the "-" button on the heater or on the remote control unit to reduce it (between 15 degrees C and 32 degrees C).
3. Set the fan speed
Press the "MENU" button unitl the display screen shows "HH" or "LL" then press the "+" button to set the "HH" (High speed) or the "-" button to set "LL" (Low speed).
4. Set the timing
Press the "MENU" button until the display screen shows one number between 1 and 12, then press the "+" button to increase timing time or the "-" to reduce it. You can also repeatedly press the "Timer" button on the remote control unit to set the timing time.






