Product Review

How to install:

1. Apply a proper amount of cement glue

2. Place the spacer according to the size of the tile

3. Square the tile and tapit with a rubber hammer

4. Insert tile wedges

5. Adjust the pliers screwsto determine the pushing distance (to ensure that each wedge is pushed at the same distance to ensure the same level of tile)

6. Push the wedge with pliers

7. Clean the gap betweenthe cement

8. One tile suggests usefour tile spacers

9. After 24 hours, kick out it, or tap the side of the rubber hammer

 Note:

1. Before putting tiles, remember to erase some of the cement on the edge of tile. Do not fill up the tiles with cement. This will prevent the cement from being wrapped in the clamps after tile clips are placed. The solidification will affect the removal of clips.

2. If there is too much cement in the gap between the tiles, it is recommended to clean them with tools such as blades.

 Product portfolio:

1. 300 pcs disposable PVC 1/16 tile spacers

Environmentally friendlyand non-toxic, when they are placed between two tiles, the seams are even, wedges and pliers are fixed and clamped, and the cement in the gaps on both sides of the PVC spacers is cleaned with small tools (to prevent the cement from coagulating).When the cement solidifies, use a rubber hammer to break the spacer base from side

2. 120 pcs reusable tile wedges

Wear and pressure resistance. Lengthening and widening, the insert area is larger, greatly improving the flatness of the tile surface.

3. Labor-saving pliers

The labor-saving lever design has large clamping force. Push wedges to make it tightly fixed. The 6 gear positions can be adjusted to save effort and comfort.

Product List:

1) 300 tile spacers

2) 120 reusable green tile wedges

3) 1 push pliers