2pcs/Package CNC Carving 2 Flutes Tapered Ball end Mills Angle 2.24° Tip Radius=1.0mm X 1/8" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated

CNC Carving 3.02 Deg 2 Flutes Tapered Angle Ball Tip Radius=1.5mm X 1/4

Disclaimer: As an Amazon Associate I may earn from qualifying purchases

-Type: Tapered angle Ball Nose End Mill / Cone Cutters
-Flutes: 2 Flutes
-Tip Radius: 1.5mm
-Shank Diameter: 1/4"((d1)
-Cutting Length: 1-1/4"(L1)
-Overall Length: 3"(L)
-Single side angle B=3.0...

Product Review

-Type: Tapered angle Ball Nose End Mill / Cone Cutters
-Flutes: 2 Flutes
-Tip Radius: 1.5mm
-Shank Diameter: 1/4"((d1)
-Cutting Length: 1-1/4"(L1)
-Overall Length: 3"(L)
-Single side angle B=3.02Â°(Approx.)
-Coating: TiAIN
-Material: imported tungsten carbide
-Suitable For:Cutting, end milling, slotting on: aluminum, solid wood,partical board,Hard wood, plywood, etc; -Use top quality imported tungsten steel carbide -Excellent chip removal effect! -High surface finish, excellent work -Long service life

Similar Products

JERRAY CNC Carving 4.82 Deg Tapered Angle Ball Tip Radius=0.5mm X 1/4" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated Router Bits

JERRAY CNC Carving 3.92 Deg 2 flutes Tapered Angle Ball Tip radius=1.0mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated

CNC Carving 5.26 Deg 2 flutes Tapered Angle Ball Tip radius=0.25mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated

4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8" (3.175mm) Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated

CNC Carving 4.36Deg 2 flutes Tapered Angle Ball Tip radius=0.75mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated

Yonico 34221-SC 1/4-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 1/4-Inch Shank

1/8" 22mm Carbide Ball Nose End Mills CNC Router Bits Double Flute Spiral Set Tool Pack Of 10

$Whiteside 6210 CNC Spoilboard Surfacing Router Bit, 1/4\" Shank (Original Version)$

Whiteside Router Bits 1540 V-Groove 60-Degree 1/4-Inch Cutting Diameter and 7/32-Inch Point Length

2pcs/Package CNC Carving 2 Flutes Tapered Ball end Mills Angle 2.24° Tip Radius=1.0mm X 1/8" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated

Track Price :: Reviewing Millions of Products!

CNC Carving 3.02 Deg 2 Flutes Tapered Angle Ball Tip Radius=1.5mm X 1/4" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated

Product Review