Product Review

(1) TB6600 Stepper Motor Driver:
Single chip bipolar sine microstep stepper motor driver.
New BiCD 0.13 nm process.
Up to 42V.
5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32).
Output current: IOUT = 4.0A (peak, in 100ms).
rated output: IOUT = 3.5 A
Resistance (a +) = 0.4
Alarm output pin current:Ialert = 1mA
Monitoring output pin (MO): Imo= 1mA
Break through the traditional, single power supply.
Built in overheating protection (TSD) circuit.
Undervoltage protection, built-in (UVLO) circuit.
Built-in overcurrent detection (ISD), circuit.
Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.

(2) Nema 17 Stepper Motor:
Motor type: Bipolar Stepper
Phase Resistance: 1.5Ohm
Phase Inductance: 2.8mH
Detent Torque: 2.2N.cm
Rotor Inertia: 54g.cm2
Holding Torque: 40N.cm
Step angle: 1.8 deg
Motor Weight: 280g
Step angle accuracy: + - 5%(full step, not load)
Resistance accuracy: + - 10%
Inductance accuracy: + - 20%
Temperature rise: 80deg Max(rated current, 2 phase on)
Ambient temperature: -20deg ~+50deg
Insulation resistance: 100MΩ Min, 500VDC
Insultion Strength: 500VAC for one minute
Connection: Red(A+), Green(A-), Yellow(B+), Blue(B-)


Package Included:
1 x TB6600 Motor Driver
1 x Nema 17 Motor
1 x Mounting Bracket
4 x M4 Screws
4 x M3 Screws
2 x Inner Hexagon Spanner


Tips:
Please make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.