Product Review
Specification:
Power supply voltage: 15-160V / 5-12V
Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
Size: Approx. 73 x 51 x 37mm / 2.87 x 2 x 1.45inch
Weight: 50g
Quantity: 1pc
Package List:
1 x PWM Generator
Note:
If you use to start or stop the function, ENA controller enable terminal must be connected to common cathode or common anode drive.
- THREE TYPES OF FREQUENCY-- The controller has high, medium and low total of three types of frequency signals can be used to select jumper. It has simple construction, easy to install.
- EASY WIRING-- PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions.
- APPLICATION-- This module is used for driving signal for stepper. If you want to control the stepper motor, must equipped with the drive at the same time. It controls the speed by adjusting the frequency of the potentiometer.
- WITH HIGH SENSITIVITY KNOB-- The controller is designed with a high sensitivity knob, you can easily control the speed of motor by turning it. The forward and reverse of the motor can be controlled by pressing the key.
- FEATURE-- Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.
