Product Review

Note:
Please read the user manual and program the RFID card/tag before installation.

Feature
1.The cabinet wooden door should not exceed 1.2 inches thick
2.Multiple Unlock Mode: Single Unlock Mode, Dual Unlock Mode
3.2 x AA 1.5V batteries required
4.The sound alarm will alert when the batteries power is low
5.The batteries can last 8-12 months under normal use
6.1 management card and 10 user card can be configured on this lock kit

Operation Instructions
1.Reset
Install 2 x AA 1.5V Batteries, press the reset button at the backside of the lock body until a long beep.
2.Creating Management Card
After reset the lock, swipe the RFID card / tag, this first card / tag will be configured as Management Card.
3.Select Unlock Mode
After setting the Management Card, you should select the unlock mode.
(1)Press the reset button shortly and release, if you hear one short beep and one long beep, this is for Single Mode.
(2)Press the reset button shortly and release, if you hear two short beep and one long beep, this is for Dual Mode.
4.Add User Card
Swipe the management card, and swipe the new cards which you want to add within the beeps.
5.Delete Cards
Same as reset. Press the reset button at the backside of the lock body until a long beep, all management card and user cards will be invalid. Then you can set new management card.
6.Low Voltage Alarm
Please use 1.5V AA Batteries. When you swipe the card to unlock, the voice alarm will alert ( you can hear a long beep) when the battery power is low. You still can swipe card to unlock for max. 50 times. Please replace the batteries promptly.

Package
1 x Lock Body, 1 x Latch, 1 set x Screws, 1 set x RFID Card/Tag, 1 x Icon