Product Review

★We ship from the US
Parameter:
Cooling:50W/℃
Voltage:AC110V
Max .Lift:10M
Frequence:50HZ/60hz
Max.Flow:10L/Min
Current:0.45A
N.W:21Lbs / 9.5kg
Capacity:9L
G.W:26Lbs / 12kg
Protection:Flow Alarm
size：47*27*37cm

CW-3000 Series is professional cooling machine referring to international, advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery. It has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable. It is designed for cooling the one CO2 glass laser tube of the laser engraving and cutting machine.

Install steps:
1. Open the package to check if the machine is intact and all the necessary accessories are completed.
2. Open the mouth screw on the top of machine, add cooling water (Please don't power the machine without water).
3. According to system conditions, connect the water isnlet and outlet pipe well.
4. Connect the power cable, turn the power switch (Note: Don't let the water overflow). 5. Check the radiator water level again

Notice:
Cooling machine no use for long time or in transport must keep emptying the cooling water. It is strictly forbidden to plug and run the cooler without feeding water.
Cooler should be placed in a well-ventilated, dry environment place and away from heat sources. Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 10cm between obstructions and air inlets of two sides.
To ensure good heat dissipating, please open the lid to clean the dirt after the cooler used in long-term.
Working in cold north area, it is better to use noncorrosive. Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature.