Product Review
Do you have any places in your house where your pets need to keep away from?
It's time to try this pet training mat and gently teach your pets to stay away from these area.
OPERATING GUIDE,
1.Remove the Pet Training Mat from its box. Lay it flat in a warm environment to allow it to un-crease.2.Insert a new alkaline type 9 volt battery.
3.Place the device at its working location. 4.Switch ON and wait 60 seconds for calibration. 5.Test the mat using "tone only" .
6.Set training mode to: "Stimulation+Tone". 7.Wait for your pet to learn about the mat.
INSERTING THE BATTERY
On the front of the electronics controller, slide the battery door open. Connect and insert a new 9V ALKALINE battery.
Then slide the battery door back into place. Battery life is up to 6 weeks. We recommend switching the Pet Training Mat OFF when not in use.
SWITCHING THE PET TRAINING MAT ON:
To switch ON, momentarily press and release the button . The green LED lights will periodically flash to indicate it is switched ON.
SWITCHING THE PET MAT OFF:
Pressï¹ hold the button for 3 seconds, then release. The red LED will flash a few times to confirm you selected OFF.
Reset
- Remove the battery from the pet mat, then wait about 5 minutes to discharge all power and static to reset.
If the pet mat is abnormal, please try to reset it and then check it again.
Specification:
Material:Transparent Soft PVC
Product Dimensions: 12" - 60"
Color: Transparent
Power Supply: 1 - 9V Battery(NOT INCLUDED) Package Content: 1 - Pet Trainning Mat
Note
- DO NOT put the mat in water to clean it.
- Battery is NOT INCLUDED.
- This trainning mat may not take effect if your pet loves to feel static pulse because of individual difference.
- Any questions welcome to contact us directly, and we are willing to help you.










