SUPERNIGHT LED Strip Light, RGBW, Waterproof 16.4ft 5050 300leds LED Strip Flexible Light, RGB with White Mixed Color Tape for TV Backlighting, Bedroom, Car, Carbin

Product Review

Specification:
Input Voltage: DC12V-24V
Output Max Current: 6A/CH
Total Output Current: 15 A
Max. Load Power:180W(12V) / 360W(24V)
Remote Distance:10~15 meters
Connecting mode: common anode
Controled Method:ZIGBEE ZLL
Connection Mode:APP Control.
Material:ABS
Static Power consumption: <1W
Size: L3.54 in*W1.9 in*H0.98 in

Remarksï¼šThe Zigbee Strip Controller works with ZigBee Light Link Gateways/ like "Hue",Lightify Hub,Homee,Smart Friends and Amazon Echo Plus,But this zigbee strip controller don't compatible with Wi-Fi Device of the 2nd Gen Echo dot and the 3nd Gen Echo,They must be Link to the Zigbee Hub (Hue Bridge and Lightify Hub)
Wire Connection:
1. Please prepare the cable like picture P1 and strip the isolation to 9-10 mm. The cable cross-section must be between 0,33 and 2,08mmâŠƒ2;(AWG22-14).
2. Now push down the terminal with a screwdriver and put in the cable.
3. Take the screwdriver away and the cable is connected with the terminal.
Connection with Gateway:
1. Connect the LED product to the controller see section "wire connection".
2. Start the device searching on the ZigBee Light Link Gateway, it could take some time.
If the Gateway does not find the device, plug power off/on or make a reset.
3. The Gateway found your device and you can assign it to the different rooms/zones/groups.
4. Now you can use the device.
Reset:
1. Switch on your device.
2. Now switch off and on within 2 seconds.
3. Repeat off/on four times.
4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.

For RGBW/RGBW devices you will find two SSIDs. One for white/warmwhite, the other for RGB.
**The Osram Gateway supports only one SSID, with the RGBW/RGBWW device it find only RGB.

Package include:
1 x Zigbee Strip Controller
1 x instruction book

💡 The Controller must works with Standard Light Link ZigBee Hub (Required),Compatible with Hue Bridge,Gateways Lightify Hub,SmartThings and Amazon Echo Plus【✅Note:Confirm that your device supports Zigbee Light Link before use.If you can't connect, please reset the controller. And check whether the power is normal. If the voltage is different, the indicator will flash.】
💡 Directly Works with Alexa Echo Plus,Voice control your led light by speaking to Amazon Alexa,you can turn on/off,change the color,dim/brighten the LED light
💡 Works with Philips Hue APP Control your LED lights from anywhere;You can make the lights lighting with the rhythm of music in your Smart Phone, You also can control multiple controllers(strip lights) at the same time on 1 app by setting up groups
💡 Works with Normal RGB & RGBW LED Strip Lights 12/24V DC.Sold separately RGBW LED strip ASIN:B07JKKP89M(The package only a Zigbee Smart LED Controller,and is the 1 SSID version）
💡 Timer Controlled:You can set the led light to power on with the morning sun,gently waking you,or to turn on and off as you leave or arrive home.【 if have any question,Pls contact:[email protected]】

Track Price :: Reviewing Millions of Products!

GIDERWEL Home Smart ZigBee RGBW RGB Strip Controller Dimmable,Work with Hue Bridge SmartThings Amazon Echo Plus,Lightify Hub for APP/Voice Controlled RGB RGBW LED Strips,only a Zigbee Controller

Product Review